Saudi Arabia: +966 5 3142 8354
Dammam – Saudi Arabia

GALLUS SERVOSTAR 601/620 Servo Drive



Technical description

The SERVOSTAR 600 family of digital servo amplifiers

Standard version
6 current ratings (1.5 A -Europe only-, 3 A , 6 A , 10 A , 14 A, 20 A)
3 instrument widths : 70 mm for 1.5A up to 10A rated current
100 mm for 14A rated current
120 mm for 20A rated current
Wide range of rated voltage (3x208V –10% to 3x480V +10%)
Overvoltage category III acc. to EN 61800-5-1
Shield connection directly at the servo amplifier
2 analog setpoint inputs
Integrated CANopen (default 500 kBaud), for integration into CAN bus systems and for
setting parameters for several amplifiers via the PC-interface of one amplifier
Integrated RS232, electrically isolated, integrated pulse-direction interface
Synchronous servomotors, linear motors and asynchronous motors can be used

Electrical supply
Directly off grounded 3 phase system,
230V-10% … 480V+10%, 50 Hz,
208V-10% … 480V+10%, 60 Hz
TN-system or TT-system with grounded neutral point, max. 42,000 rms symmetrical amperes.
Connection to other mains supply networks only with insulating transformer p.46
B6 rectifier bridge, directly off 3-phase earthed (grounded) supply system, integral power input
filter and inrush circuit
Single-phase supply (e.g. for setup) is possible
Fusing: (e.g. fusible cutout) provided by the user
Shielding: All shielding connections directly on the amplifier
Output stage: IGBT- module with isolated current measurement
Brake circuit: with dynamic distribution of the brake power between several
amplifiers on the same DC bus link circuit. Internal brake resistor as
standard, external brake resistors if required
DC bus link voltage 260 — 900 VDC, can be switched in parallel
Interference suppression filter for the supply input (to category 3) is integrated
Interference suppression filter for the 24V aux. supply (to category 3) is integrated